Innobiz Ultrasonic essential oil diffuser Ceralia

The Ceralia combines design with the well-being of aromatic diffusion, allowing you to create a soft, pleasant olfactory ambience.

Practical and easy to use, you'll be seduced by its soft, subdued illumination, making this diffuser an excellent decorative object.

This essential oil diffuser works by misting water. Just a few drops of essential oils added to water (15 drops maximum) diffuse their scents and benefits throughout your home. Ultrasonic misting emits a light mist of water that diffuses essential oils and pleasantly humidifies dry air.

Thanks to the brumisation technique, diffusion can reach up to 30m².

How the diffuser works Ceralia

Misting is caused by the vibration of a ceramic pellet at very high frequency, which engages ultrasound through its movement. This is why the Ceralia diffuser is ultrasonic by misting.

Diffuser features Ceralia

• Light control
• Water level sensor and automatic shut-off when water level is low
• Diffusion area: up to 30m²
• Diffusion time: on/off button integrated under the product
• Power: 12W
• Packaging weight: 690g
• Other : Air humidification

Mounting the diffuser of the diffuser Ceralia

1. The unit should be placed on a flat, horizontal surface.
2. Connect the mains adapter to the diffuser without plugging it into a mains socket.
3. Remove the ceramic cover and lid.

1. Using tap water at room temperature (not demineralized water), fill the base reservoir with a maximum of 80 ml (do not exceed the maximum level mark).
2. Add 5 to 15 drops (maximum) of essential oils to be diffused into the water.
3. Replace the lid, then the ceramic cover on the base.
4. Plug in the mains adapter.
5. To switch on your Céralia, simply apply pressure to the top of the unit. This will activate the "foot button" on the underside of the device.

The Ceralia diffuser box contains

• Ceramic casing
• Lid
• Base with ceramic disc
• AC adapter
• Instructions for use.

Hints for using the diffuser Ceralia

Successive presses will offer you several operating modes:

• 1st press: diffusion of mist + color-changing light
• 2nd press: mist diffusion + light fixed on the last color to appear
• 3rd press: fog diffusion without light
• 4th press: device switches off (no mist or light)

Mist diffuser maintenance Ceralia

1. Make sure your device is switched off.
2. Unplug the AC adapter from the mains socket, then disconnect the AC adapter from the Céralia base.
3. Remove the ceramic cover and lid.
4. Drain any water remaining in your Céralia.
5. Use a cotton swab or soft, clean cloth to clean the inside of the Céralia; be careful not to press too hard on the ceramic disc, as this element is fragile. This
6. cleaning is recommended every 3 uses.

Precautions for using the diffuser Ceralia

Do not activate diffusion in the presence of children under 6 and pregnant women. In a children's room, we recommend that you do so outside their presence and at least 30 minutes before their arrival.

Before using the device, please read the following precautions carefully

Do not use chemical fragrances, only 100% natural essential oils. - Do not pour more than 15 drops of essential oils into the device.