Photographic trap PIE1076

PIR sensors (motion and heat detectors)

1 central sensor + 2 side sensors
Wide detection angle: 120° total | Central PIR sensor: 90°
Detection distance: about 20 m
Adjustable detection sensitivity: Low | Medium | High


Invisible infrared flash for night photos and videos



34 invisible black LEDs
Wavelengths: 940 nm
Adjustable infrared flash range: Short | Medium | Long
Maximum flash range: about 20 m
Automatic infrared flash activation based on brightness


Field of view: 84°
Trigger speed: 0.3 seconds
3 capture modes



Photo: 1 to 5 photos per trigger
Video: programmable duration from 5 seconds to 10 minutes | Programmable audio recording
Photo + Video: one photo then a video are taken with each trigger


Photo resolution: programmable up to 48 MP
Photo file format: JPG
Video resolution: programmable up to 4K
Video file format: AVI
3 operating modes

Motion detection mode: the device takes photos or videos when the PIR sensors (motion/heat detectors) detect activity in the area they cover.
Time Lapse mode: photos or videos are automatically taken at user-defined regular time intervals. In this mode, the PIR sensors are disabled (there is no motion/heat detection). If the user sets the interval to 30 minutes, the device will automatically take a photo or video every 30 minutes.
Time Lapse + video mode: the device automatically takes photos at user-defined regular time intervals and then generates a video from the captured photos. In this mode, the PIR sensors are disabled (there is no motion/heat detection). If the user sets the interval to 30 minutes, the device will automatically take a photo every 30 minutes.


Operating period: programmable - The device can operate 24/7 or only during a user-defined time window.
Timestamp on photos: programmable - If the setting is set to ON, the following information will be printed at the bottom of the photos: date and time of the photo, ambient temperature, lunar phase, battery level, and camera name (if the user has programmed one).
Memory: micro SD card with a maximum capacity of 512 GB, minimum class 10 (not included). You can purchase micro SD cards at any time on this website.
Device name: programmable - Very useful for users with multiple devices as it allows knowing which device (and therefore where) a photo was taken.
Password: programmable
Loop recording function: programmable - If the setting is set to ON, when the memory card is full, the camera continues to record new photos/videos by deleting the oldest photos/videos.